Note: This is a Conversion kit to change your Dual Stack Bow mount to a Triple Bow mount. It contains a New Triple Top, Top Slider Bar, and Bottom Slider Bars. The Slider Bars will have holes drilled and tapped to fit your Sonars.
The slider Bars are integrated into the New Triple top, and they can slide both bottom units to the Left and Right to adjust for the TM cables. This kit is Sold as a Kit and not sold separately. For you to convert your current mount, be sure you do have the 1-3/4″ cable hole in your Bow plate, if not, there will not be enough cable hole for 3 Units.
Note: Some conversion kits need a D Leveler for a Triple mount conversion to work, when you order the Conversion Kit, you will need to mark the Box below to tell us if you already have a D Leveler on your Current mount or not. If yours requires a D Leveler, then we will send it with the conversion kit, but you will need to drill and tap holes in your current plate to mount the D Leveler. You will need a 7/32 drill bit and a 1/4-20 thread Tap.
Note: Some Units will not fit together on the Triple, such as a 16 size graphs are just too wide.
Three – 12 size or a combination 12’s, 10’s is no problem.
Important
***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.
No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***
Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar’s
Dual Mount Conversions
Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.
The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.
Reviews
There are no reviews yet.