Menu

0

$0.00

Air Filters, Intakes and Fuel Filters

265 ITEMS

Catalog

View

Per Page

for 2014-2017 Chevy/GMC 1500 5.3L, and 2015 SUV

Outflows stock by 29%, increasing Power & MPG

Banks Ram-Air Intake feeds your Chevy/GMC gas engine cooler, denser, outside air for greater power and fuel economy.

Owners Manual, Banks Ram-Air, 2014-2017 Chevrolet 5.3L & 6.2L

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41855
Brand:
Banks Power
Weight:
13 lbs
Dimensions:
22 × 19 × 11 in
Engine:

Liter:

Fuel Type:

for 2009-2013 Chevy/GMC Silverado/Sierra 1500, Tahoe/Yukon 5.3L, with Electric Fan

Outflows stock by 29%, increasing Power & MPG

Banks Ram-Air Intake feeds your Chevy/GMC gas engine cooler, denser, outside air for greater power and fuel economy.

Fits vehicles with mechanical filter minder. Electric pressure sensor, see note in description*
Optional Super-Scoop rams cold air for more power. (42235 for 2007-10; 42237 for 2011-12)

Owners Manual, Ram-Air System - 2011-2014 Chevy/GMC 4.8-6.2L V-8 Gas Pickups & SUVs

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41850
Brand:
Banks Power
Weight:
28 lbs
Dimensions:
22 × 19 × 11 in
Engine:

, , ,

Liter:

, , ,

Fuel Type:

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-1561KP
Brand:
K & N
Weight:
15.23 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-1583KP
Brand:
K & N
Weight:
15 lbs
Dimensions:
24.2 × 20.2 × 15.6 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-3095
Brand:
K & N
Weight:
13.6 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-2612
Brand:
K & N
Weight:
13 lbs
Dimensions:
24.2 × 20.2 × 15.6 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-2556
Brand:
K & N
Weight:
14 lbs
Dimensions:
22.25 × 14.25 × 12.5 in

for 2017-2019 Chevy/GMC 2500/3500 6.6L Duramax, L5P

Add an additional +20 hp to your 2017-2019 Duramax

Beats stock and the competition. New over-sized filter element protects engine and outflows competition. Enclosed housing keeps out hot, power-robbing engine air. Reduces soot output, decreasing the frequency between regens.

Combine with the Derringer inline tuner for a total gain of 81 hp.

Owners Manual, Banks Ram Air Intake System, 2017-2019 Chevy 6.6 Duramax

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-42249
Brand:
Banks Power
Weight:
15 lbs
Dimensions:
22 × 19 × 11 in
Engine:

Liter:

Fuel Type:

for 2012-2018 Jeep Wrangler JK 3.6L

Gains +8 hp/+11 lb-ft, Tuned to eliminate drone

Cold-air intake with large lifetime filter, enclosed housing and large tubing offers huge improvements over stock flow, increasing power and fuel economy. Tuned Helmholtz resonator eliminates engine drone.

Does not fit JL.

Owners Manual, Ram-Air System - 2012-18 Jeep 3.6L Wrangler JK

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41837-D
Brand:
Banks Power
Weight:
28 lbs
Dimensions:
22 × 19 × 11 in
Engine:

Liter:

Fuel Type:

for 2011-2014 Ford F150 3.5L EcoBoost

Banks Ram-Air Superiority. Improves flow 64.6%

More power and better mileage for your EcoBoost! Beats stock and the competition! Up to 64.6 Percent less restrictive than stock.

Ram-Air Intake Syst, Dry Filter - 2011-14 Ford F-150, 3.5L EcoBoost

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41870-D
Brand:
Banks Power
Weight:
28 lbs
Dimensions:
22 × 19 × 11 in
Engine:

Liter:

Fuel Type:

for 2004-2008 Ford F150 5.4L

Banks Ram-Air Superiority, Improves flow up to 63%

Outflows the stock setup by up to 63%. Streamlined design with complete air filter housing draws in cool, under-vehicle air for greater power. Includes High-Ram intake plenum.

Owners Manual, Ram-Air System - 2004-08 Ford 5.4L

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41806
Brand:
Banks Power
Weight:
28 lbs
Dimensions:
22 × 19 × 11 in
Engine:

Liter:

Fuel Type:

for 1999-2008 Chevy/GMC 1500 4.8L-6.0L

Outflows stock by 29%, increasing Power & MPG

Banks Ram-Air Intake feeds your Chevy/GMC gas engine cooler, denser, outside air for greater power and fuel economy.

This product does not fit 2500 or 3500 pickup trucks. Optional Super-Scoop (42235) rams cold air for more power.

Owners Manual, Ram-Air System - 1999-08 Chevy 4.8-6.0L

Crossed Industries, L.L.C. is NOT responsible for any damage or failure resulting from improper installation.

SKU:
BP-41800
Brand:
Banks Power
Weight:
28 lbs
Dimensions:
22 × 19 × 11 in
Engine:

, ,

Liter:

, ,

Fuel Type:

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-9031-1
Brand:
K & N
Weight:
14.19 lbs
Dimensions:
18.25 × 18.25 × 12.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-9037
Brand:
K & N
Weight:
11.64 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-3065
Brand:
K & N
Weight:
11.18 lbs
Dimensions:
18.25 × 18.25 × 12.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-2582KTK
Brand:
K & N
Weight:
12.1 lbs
Dimensions:
35.5 × 13.25 × 10.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-2581
Brand:
K & N
Weight:
10.62 lbs
Dimensions:
22.25 × 14.25 × 12.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1561
Brand:
K & N
Weight:
15.07 lbs
Dimensions:
24.2 × 14.4 × 13.4 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-3085
Brand:
K & N
Weight:
12.86 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-3082KP
Brand:
K & N
Weight:
13.2 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-9040KP
Brand:
K & N
Weight:
14.5 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-9039KP
Brand:
K & N
Weight:
12 lbs
Dimensions:
18.25 × 18.25 × 12.5 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-9033KP
Brand:
K & N
Weight:
13.6 lbs
Dimensions:
24.2 × 20.2 × 15.6 in

Gain a guaranteed increase in horsepower and torque with a K&N® cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-77-9031-1KP
Brand:
K & N
Weight:
14.1 lbs
Dimensions:
18.25 × 18.25 × 12.5 in