Menu

0

$0.00

Hunting

42 ITEMS

Catalog

View

Per Page

show blocks helper

Product categories +

Brands +


A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-63-3072
Brand:
K & N
Weight:
10.23 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

The K&N 63-1136 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in select Polaris Ranger RZR models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1136 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing high-density polyethylene intake tube
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filter
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1136
Brand:
K & N
Weight:
12.8 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

The K&N 63-1133 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Polaris Ranger RZR models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1133 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing high-density polyethylene intake tube
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filter
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1133
Brand:
K & N
Weight:
13.2 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

The K&N 63-1128 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Suzuki LTR450 Quadracer models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1128 air intake comes with a chrome topped, over-sized cone shaped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The air intake system accommodates the factory air temperature sensor and crank case vent hose. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing high-density polyethylene intake tube
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filter
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1128
Brand:
K & N
Weight:
5.61 lbs
Dimensions:
18.25 × 14.5 × 8.5 in

The K&N 63-1124 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Kawasaki KFX450R models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1124 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The air intake system accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set, needle nose pliers and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing high-density polyethylene intake tube
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filter
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1124
Brand:
K & N
Weight:
6.3 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

The K&N 63-1123 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Yamaha YFZ450 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1123 air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The heat shield accommodates a replacement silicone crank case vent hose and supplied CCV filter. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing high-density polyethylene intake tube
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filter
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

RESOURCES:
SKU:
KN-63-1123
Brand:
K & N
Weight:
6.2 lbs
Dimensions:
18.25 × 14.5 × 8.5 in

The K&N 57-1136 cold air intake system replaces the factory air filter and air intake housing in many Polaris Ranger RZR models for a guaranteed increase in horsepower and torque. A free-flowing aluminum intake tube helps increase the volume of airflow to your engine. The system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media, which is protected by an enclosed filter housing for additional protection from heat and the elements. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. Can typically be installed in 90 minutes or less using standard hand tools. Legal in all 50 States.

  • Guaranteed to increase horsepower and torque
  • Free-flowing aluminum intake tube
  • Designed to improve throttle response and engine sound
  • Engineered to provide high airflow and exceptional filtration
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty
  • 50 State legal
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1136
Brand:
K & N
Weight:
12.8 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

The K&N 57-1133 cold air intake system replaces the factory air filter and air intake housing in many Polaris Ranger RZR models for a guaranteed increase in horsepower and torque. A free-flowing aluminum intake tube helps increase the volume of airflow to your engine. The system is paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media, which is protected by an enclosed filter housing for additional protection from heat and the elements. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. Can typically be installed in 90 minutes or less using standard hand tools. Legal in all 50 States.

  • Guaranteed to increase horsepower and torque
  • Free-flowing aluminum intake tube
  • Designed to improve throttle response and engine sound
  • Engineered to provide high airflow and exceptional filtration
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty
  • 50 State legal
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1133
Brand:
K & N
Weight:
13.2 lbs
Dimensions:
24.1 × 15.5 × 14.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1128
Brand:
K & N
Weight:
5.61 lbs
Dimensions:
18.25 × 14.5 × 8.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1124
Brand:
K & N
Weight:
6.3 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 90 minutes or less with simple hand tools
  • 10-Year/Million Mile Limited Warranty™
  • Will not void vehicle warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1121
Brand:
K & N
Weight:
11.92 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

The K&N 57-1120 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Polaris Ranger RZR 800, S and 4 models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through a high-flow air intake tube and into the engine’s throttle body for a guaranteed power gain. The large, tapered cylinder shaped air filter is washable and reusable and comes complete with a black DryCharger filter wrap that helps repel water and dust in the harsh conditions that a Polaris Ranger RZR is typically driven in. The air intake assembly also accommodates the factory crank case vent hose with an additional small K&N air filter that mounts onto the heat shield. This K&N air intake system complies with California emission standards and is street legal in all 50 states.

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Washable and reusable lifetime air filters
  • Includes DryCharger air filter wrap designed to extend air filter service intervals
  • Free-flowing air intake tube
  • Replaces entire factory air intake system
  • K&N Million Mile Limited Warranty
TOOLS NEEDED

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

INSTALLATION TIME

60-90 Minutes

SKU:
KN-57-1120
Brand:
K & N
Weight:
9.46 lbs
Dimensions:
20.25 × 12.25 × 12.5 in

Price

$228.00$310.00

Quantity

- +

Total

$228.00$310.00

-

0 reviews

Information

Choose Options

Quick View

SKU:
FO-GRIPPERTRK
Brand:
Fuel Offroad

Price

$196.00$216.00

Quantity

- +

Total

$196.00$216.00

-

0 reviews

Information

Choose Options

Quick View

SKU:
FO-GRIPPERRT
Brand:
Fuel Offroad
Weight:
N/A

Price

$196.00$216.00

Quantity

- +

Total

$196.00$216.00

-

0 reviews

Information

Choose Options

Quick View

We’re excited to offer DOT-approved Fuel Gripper UTV tires. Tested in the toughest conditions so you never have to end your adventure early. The Gripper UTV is the tire that’s strong enough to blast through the open desert and also features channeled tread design to cut deep into the mud and loam.

SKU:
FO-GRIPPERUTV
Brand:
Fuel Offroad