AMP Research Powerstep Plug-N-Play – Ford Expedition

AUTOMATIC RETRACTING STEP

PowerSteps automatically deploy when the door opens and will retract after a 3 second delay when the door closes.

LOWER DEPLOYED STEP

AMP Research PowerStep Running Boards drop much lower than other steps. Most stationary running boards rest 1-2 inches below the body and are often still too far from the ground to be convenient for many passengers.

MAXIMUM GROUND CLEARANCE

The PowerStep Smart Series Running Boards tuck under the vehicle when retracted, providing amazing ground clearance while driving, and the functionality of a perfectly placed step when deployed.

WIDE STEP SURFACE

The board width is a massive 6 inches and perfect for any type of footwear.

INTEGRATED LED LIGHTING

All PowerSteps Include two pair of LED lights to illuminate the running board and ground below to maximize safety when entering and exiting your vehicle. The lighting will activate when the steps deploy and will shut off when the steps are retracted!

600 LB LOAD CAPACITY

From the brackets to the boards, each PowerStep Running Board features a 600 LB load capacity – that is twice the weight capacity as most other steps!

• The original electric-powered running board
• Premium, single-motor design automatically deploys and retracts boards
• Corrosion-resistant die-cast aluminum construction
• Military-grade black PTFE coating
• 6-inch wide, cab-length steps
• Textured, slip-resistant step surface
• Low-profile, integrated LED courtesy lights
• Optional Override Switch is available for manual control
• Includes vehicle-specific installation guide and mount kit
• Mounts to vehicle’s rocker panel
• Newer applications connect to OBDII port via Plug-N-Play module
• Professional installation recommended
• 5-year limited warranty

While every pickup truck, Jeep, or SUV can benefit from a set of running boards, only some consumers enjoy the aesthetic. Luckily, AMP Research offers its patented power step; a heavy-duty, power retractable running board that deploys when needed and retracts under the body when not in use.

AMP Research utilizes only the finest materials, including die-cast aluminum and stainless steel for exceptional durability and corrosion resistance. The step’s surface is treated with a military-grade PTFE coating, guarding the underlying alloy against oxidation and abrasions; the black finish also provides a sleek, discreet appearance.

For ease of use, each power step includes low-profile LED courtesy lights, illuminating the step surface and surrounding area to ease low-light entry. To simplify the installation process, each set of power steps includes a vehicle-specific mounting kit, thorough instructions, and; if applicable, a plug-n-play OBD II module.

To ease entry into your ride without sacrificing aesthetics, consider AMP Research’s power steps.

Order Notes

Cleaning your PowerStep
In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise, or binding.

Prepare for cleaning
Manually set the running boards to deploy: The running boards can be manually set in the deployed position by opening the door, and then place your foot on the step. Leave firm pressure with your foot on the step while you close the door. This will leave your steps in the deployed position.

How to maintain your steps:
Using a pressure washer to clean the front and rear linkages which are all 4 hinge points for your PowerSteps. Avoid spraying the motors directly.

After washing, apply silicone spray (dry Film lubricant) only, to all 4 linkage arms and all pivot pins, some of these pins will be located up high on the linkage arm as well. Then cycle the door to work the lubrication in to the hinge points.

Do not apply silicone, wax, or protectants like Armor All® to the running board. Do not lubricate with any greases, oils, WD-40, or penetrants.

This cleaning should be done periodically, or when debris such as mud, dirt or salt becomes trapped in the running board mechanism.

Install

Each AMP Research power step includes a vehicle-specific mounting kit, providing all bracketry and hardware for a complete installation. As with any project involving wiring, professional installation is recommended. For additional assistance, consider checking out our installation videos below.

How to Install AMP Research PowerStep Xtreme Running Boards
How to Install AMP Research Power Step on a 2020 Ram 2500

Installation Instructions

Warranty

5-Year Limited Warranty

• What is Covered: All defects in materials or workmanship on select AMP Research branded products properly installed per provided instructions except those listed below under the Three Year Warranty. This warranty does not apply to any product from AMP Research direct or indirect subsidiaries.
• For How Long: This warranty, and any implied warranties including merchantability and fitness for a particular purpose, lasts five years from the date of purchase. The warranty expires if the product is removed from the original vehicle or if the original vehicle is transferred to another owner. The warranty is not transferable from the original purchaser.
• What These Warranties Will Not Cover: These warranties does not cover any damage, defect, or malfunction caused by misuse, abuse, accident, improper installation, modification, improper or inadequate maintenance, or on-road and offroad hazards. Incidental and consequential damages are not recoverable under this warranty. Some states or providence do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you.
• What AMP Research Will Do: During the applicable warranty period listed above, AMP Research will, at its option, either repair or replace any defective product at no additional charge. You must pay any labor charges associated with removing or reinstalling the product. If a specific product has been discontinued, AMP Research may, at its option, replace your product with a current product of comparable function and value.